Do you want to clean your air ducts on your own? Well, go ahead. But, just as a word of caution: air ducts must be cleaned properly or else you might even end up spending more than what you would have otherwise saved. Thus, it is best to hire a professional air duct cleaning company that will do the task for you.
As a matter of fact, air ventilation ducts must be cleaned every now and then so that you get fresh and dust free air all the time in your house. Dirty air ducts also affect your electricity bills. This is owing to the reason that electrical systems with cleaner ducts run efficiently and there is usually no wastage of electricity.
If you want to give DIY residential duct cleaning a try, here is how you can do it:
- Step One
Before you start cleaning the ventilation ducts, make sure to cover the supply register. For this, you can always use a paper towel.
You must recover the openings which supply the air into your rooms. This is done so that while you are cleaning the ducts, the dust is not drifted into your rooms. This way everything is protected and you save yourself from extra work.
- Step Two
Next step involves switching the fan on. You only need to move the fan and options like hot/cool are not required to be switched on. The movement of the fan loosens the dust which has collected over the duct parts.
- Step Three
Then, carefully put the filter in the right place. The filter is required to be at the right place because it prevents the dust to enter into the fan motor.
Dryer Vent Cleaning
- Step Four
The next step involves focusing on the ductwork. Make sure to clean the dust from each and every corner of the ducts. If there is a collection of dirt and dust over the basement of the ductwork, use the back portion of the brush to tap off the dirt as well as to break the deposits of the dust particles. Then, with the help of the brush remove the dirt.
- Step Five
When you are finished with dusting the ductwork, you can start cleaning the supply register. For this, it is best to use vacuum cleaners in order to reduce your burden of work.
The vacuum helps to suck the dust particles which may have stuck in the inner parts due to the rotating fan. Then, sweep off the dust with the help of a clean cloth soaked in water. Repeat this process twice so that register’s pipe is cleaned thoroughly.
- Step Six
Then, move to the return register. In order to clean this, start with removing the screws from the panel. Then, brush the pipe as much as possible so as to remove the dust.
- Step Seven
As a final step, vacuum the air boot returning system. Re-assemble all the parts and your cleaning work gets finished.
However, if air duct cleaning sounds like a tough task to you, call us today!
